杨俊杰

发布时间:2023-10-31 来源:化学与材料学院

姓 名:杨俊杰

性 别:

学 位:博士

研究方向:

金属大气腐蚀与防护,腐蚀电化学理论,金属表面功能性涂层技术

邮 箱:junjieyang@jnu.edu.cn

职称及职务:副教授

工作经历:

2022.10-至今:暨南大学先进耐磨蚀及功能材料研究院,副教授,硕士研究生导师

2019.03-2022.09:暨南大学先进耐磨蚀及功能材料研究院,讲师,硕士研究生导师

承担课程:

本科生课程《机械制图/机械制图CAD》

本科生课程《金属腐蚀与表面防护》

硕士研究生课程《材料腐蚀原理》

科学研究:

2018年博士毕业于哈尔滨工业大学,期间(2015年10月至2018年1月)获得国家留学基金委资助,赴德国Helmholtz Zentrum Geesthacht(现更名为Helmholtz Zentrum Hereon)进行为期2年的公派联合培养。主要从事镁合金腐蚀电化学理论、镁合金缓蚀剂和先进表面防护技术等研究工作。近年来,获批主持国家自然科学基金-青年基金项目(项目编号:52101084),广东省基础与应用基础研究基金区域联合基金-面上项目和青年项目,广州市基础与应用基础研究基金,广东省普通高校特色创新项目和中央高校基本科研业务费青年基金,同时还作为项目骨干成员参与国家重点研发计划(项目编号:2020YFC1107202)。在Corrosion Science,Journal of Magnesium and Alloys,ACS Applied Materials & Interfaces,Surface and Coatings TechnologyWear等学术期刊发表研究论文30余篇。担任Rare MetalsChina FoundrySCI学术期刊青年编委以及中国腐蚀与防护协会缓蚀剂与水处理专业委员会委员。

代表性论文:

[1]  J. Yang, P. Jiang, Y. Qiu, C.-Y. Jao, C. Blawert, S. Lamaka, A. Bouali, X. Lu, M.L. Zheludkevich, W. Li, Experimental and quantum chemical studies of carboxylates as corrosion inhibitors for AM50 alloy in pH neutral NaCl solution, J. Magnes. Alloys. 10 (2022) 555–568.

[2]  Y. Qiu, X. Tu, X. Lu, J. Yang, A novel insight into synergistic corrosion inhibition of fluoride and DL-malate as a green hybrid inhibitor for magnesium alloy, Corros. Sci. 199 (2022) 110177.

[3]  Y. Qiu, J. Li, Y. Bi, X. Lu, X. Tu, J. Yang, Insight into synergistic corrosion inhibition of 3-amino-1,2,4-triazole-5-thiol (ATT) and NaF on magnesium alloy: Experimental and theoretical approaches, Corros. Sci. 208 (2022) 110618.

[4]  J. Li, H. Qiu, X. Zhang, H.L. Yu, J. Yang, X. Tu, W. Li, Effects of (Ti, Mo) C particles on the abrasive wear -corrosion of low alloy martensitic steel, Wear. 496–497 (2022) 204288.

[5]  Y. Qiu, L. Chen, J. Yang, D. Zeng, H. Liu, J. Han, Q. Li, J. Li, X. Tu, W. Li, Mechanistic Understanding of the Corrosion Behaviors of AZ31 Finished by Wire Electric Discharge Machining, J. Electrochem. Soc. 168 (2021) 071507.

[6]  J. Li, Y. Qiu, J. Yang, Y. Sheng, Y. Yi, X. Zeng, L. Chen, F. Yin, J. Su, T. Zhang, X. Tong, B. Guo, Effect of grain refinement induced by wire and arc additive manufacture (WAAM) on the corrosion behaviors of AZ31 magnesium alloy in NaCl solution, J. Magnes. Alloys. (2021).

[7]  Y. Liu, J. Yang, H. Yang, K. Li, Y. Qiu, W. Zhang, S. Zhou, Cu-bearing 316L stainless steel coatings produced by laser melting deposition: Microstructure and corrosion behavior in simulated body fluids, Surf. Coat. Technol. 428 (2021) 127868.

[8]  H. Liu, J. Yang, X. Zhao, Y. Sheng, W. Li, C.-L. Chang, Q. Zhang, Z. Yu, X. Wang, Microstructure, mechanical properties and corrosion behaviors of biomedical Ti-Zr-Mo-xMn alloys for dental application, Corros. Sci. 161 (2019) 108195.

[9]  J. Yang, C. Blawert, S.V. Lamaka, K.A. Yasakau, L. Wang, D. Laipple, M. Schieda, S. Di, M.L. Zheludkevich, Corrosion inhibition of pure Mg containing a high level of iron impurity in pH neutral NaCl solution, Corros. Sci. 142 (2018) 222–237.

[10] J. Yang, C. Blawert, S.V. Lamaka, D. Snihirova, X. Lu, S. Di, M.L. Zheludkevich, Corrosion protection properties of inhibitor containing hybrid PEO-epoxy coating on magnesium, Corros. Sci. 140 (2018) 99–110.

[11] J. Yang, S. Di, C. Blawert, S.V. Lamaka, L. Wang, B. Fu, P. Jiang, L. Wang, M.L. Zheludkevich, Enhanced Wear Performance of Hybrid Epoxy-Ceramic Coatings on Magnesium Substrates, ACS Appl. Mater. Interfaces. 10 (2018) 30741–30751.

[12] L. Wang, M. Oehring, U. Lorenz, J. Yang, F. Pyczak, Influence of alloying additions on L12 decomposition in γ-γ′ Co-9Al-9W-2X quaternary alloys, Scr. Mater. 154 (2018) 176–181.

[13] D. Zhou, Y. Gao, J. Yang, Y.C. Li, G. Shao, G. Zhang, T. Li, L. Li, Light-Ultrasound Driven Collective “Firework” Behavior of Nanomotors, Adv. Sci. 5 (2018) 1800122.

[14] H. Liu, J. Yang, X. Zhao, Y. Sheng, W. Li, C.-L. Chang, Q. Zhang, Z. Yu, X. Wang, Microstructure, mechanical properties and corrosion behaviors of biomedical Ti-Zr-Mo-xMn alloys for dental application, Corros. Sci. 161 (2019) 108195.

[15] J. Yang, X. Lu, C. Blawert, S. Di, M.L. Zheludkevich, Microstructure and corrosion behavior of Ca/P coatings prepared on magnesium by plasma electrolytic oxidation, Surf. Coat. Technol. 319 (2017) 359–369.